• Tanks image

Filter results

Innokin's stalwart iSub V tank makes its TPD compliant 2ml capacity debut here. For those looking to enter the world of sub-ohm vaping, this is still about the best entry point with its easy-to-use set up and the ability to pump it up to between 30 and 60 watts. Tried and trusted, this is a very fine tank indeed. iSub VE Specifications: 2ml capacity (TPD compliant) 0.5ohm Kanthal BVC coil pre-installed 0.5ohm Stainless Steel 316L coil spare Material: Stainless steel Thread: 510 Full adjustable airflow iSub coil compatible iSub VE Contents: 1 x iSub VE Tank (2ml  TPD compliant edition) 1 x 0.5ohm Kanthal BVC coil pre-installed 1 x 0.5ohm Stainless Steel 316L coil replacement 1 x Vape band 1 x User manual 1 x Replacement o-rings This product is for advanced users only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk! In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire. Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates. Add to wishlist
Introducing the redesigned Cleito 120 from Aspire. A TPD compliant sub-ohm tank that is so ground-breaking it deserves a new class of its own: 'Maxi-Watt' tank. Maxi-Watt is the next level of high-power vaping. Ramp up to 120 watts almost instantly and enjoy smooth airflow, intense flavor and gigantic vapour production. The Cleito 120’s revolutionary new design enables it to produce a controlled airflow and ultra-efficient wicking with thick VG E-Liquid. The Cleito 120 is a truly wonderful tank. The Cleito 120 is built to be used between 100 and 120 Watts. Due to the tanks 0.16 ohm coil, the Cleito 120 is best used on devices capable of 100W or more. Cleito 120 TPD Edition Specifications: 2ml capacity (TPD compliant) 0.16ohm coil (100W-120W) pre-installed 0.16ohm coil (100W-120W) replacement Material: Stainless Steel Thread: 510 Delrin Drip Tip Top refill system Available in black or Stainless Steel Cleito 120 TPD Edition Contents 1 x Aspire Cleito 120 tank 1 x Replacement glass 1 x 0.16ohm coil (100W-120W) pre-installed 1 x 0.16ohm coil (100W-120W) replacement 1 x Vape band 1 x User manual 1 x Warranty card Important information about sub-ohm vaping: This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub-ohm tank. Sub-ohm coils will only work on a mod capable of firing sub-ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps. We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub-ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken. Add to wishlist
Smok's Spirals tank is the latest addition to their beautifully honed range. With 4 slots on the bottom of the tank you can really ramp up the airflow to make this quite the cloudy number, and coupled with a fantastic new style of coil this is going to be an all-day-vape must-have. Comes with a 0.6ohm dual core coil pre-installed and a spare 0.3ohm dual coil core in the box. Add to that the rebuildable deck and you can customise this great looking and performing piece of kit to your taste. Innovation keeps changing the vaping experience! Spirals (EU Edition) Specifications: 2ml capacity (TPD compliant) 0.6ohm dual core pre-installed 0.3ohm dual core spare Size: 48 x 22mm Weight: 42g Material: Stainless steel Thread: 510 Bottom adjustable airflow system Delrin Drip Tip Top refill system Spirals (EU Edition) Contents: 1 x Spirals Tank (2ml  TPD compliant edition) 1 x 0.6ohm dual core pre-installed 1 x 0.3ohm dual core spare 1x RBA Core (single coil deck) 1 x Replacement glass tube 1 x User manual 1 x Spare parts This product is for advanced users only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk! In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire. Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates. Add to wishlist
The TFV8 Baby (TPD Edition) is one third the size of the original Cloud Beast TFV8, but still packs the meanest of punches! With its 2ml TPD compliant capacity, a range of compatible coils and some precise redesigns and improvements of the air flow you'll be blowing clouds aplenty with this. Innovation keeps changing the vaping experience! TFV8 Baby (TPD Edition) Specifications: 2ml capacity (TPD compliant) 0.4ohm dual coil pre-installed 0.15ohm octuple coil spare Size: 50 x 22mm Weight: 45g Material: Stainless steel Thread: 510 Bottom adjustable airflow system Delrin Drip Tip Top refill system with child lock TFV8 Baby (EU Edition) Contents: 1 x TFV8 Baby Tank (2ml TPD compliant edition) 1 x V8 Baby-Q2 Core (0.4ohm dual coil) pre-installed 1 x V8 Baby-T8 (0.15ohm octuple coil) 1 x Replacement glass tube 1 x User manual 1 x Spare parts This product is for advanced users only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk! In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire. Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates. Add to wishlist
Innokin's iSub series welcomes a new addition - the iSub B. Utilising the new Plex 3D mesh coils, this is bound to be another popular entry in the Innokin annals. For those looking to enter the world of sub-ohm vaping, this is still about the best entry point with its easy-to-use set up and the ability to pump it up to between 30 and 60 watts. Add to that the widely variable airflow, longer lasting mesh coils and compatibility with the whole range of iSub coils and you have yourself a winner. Tried and trusted, this is a very fine tank indeed. iSub B Specifications: 2ml capacity 0.35ohm Plex 3D coil pre-installed 0.35ohm Plex 3D coil spare Material: Stainless steel Thread: 510 Full adjustable airflow iSub coil compatible iSub B Contents: 1 x iSub B Tank 1 x 0.35ohm Plex 3D coil pre-installed 1 x 0.35ohm Plex 3D coil replacement 1 x Vape band 1 x User manual 1 x Replacement o-rings This product is for advanced users only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk! In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire. Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates. Add to wishlist
  • 1
  • Showing 1 - 23 of 23 results

© Vaper Vapour 2024. Registered no 09081050.
Online Shop Builder & ePOS System by ShopTill-e.com