Please note - requires 1 x 18650 battery (sold separately) .
Just like it's name, the iStick Pico is compact and exquisite in appearance. Powered by a single replaceable 18650 battery that can easily be accessed through the battery screw cap, this small mod is deceptively powerful with a maximum output of 75W.
Two power adjustment buttons have been discreetly placed on the bottom of the unit while a bright OLED screen on the front of the device displays the vaping settings. The Pico offers a variety of firing modes and whilst in temperature control mode will accommodate nickel, titanium and stainless steel coils.
iStick Pico Specifications:
Firing Modes: VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3
Wattage Range: 1W - 75W
Temperature Range: 200°F - 600°F / 100°C - 315°C
Resistance Range:
0.1ohm - 3.5ohm (VW & Bypass Modes)
0.05ohm - 1.5ohm (TC-Ni, Ti, SS & TCR-M1, M2, M3 Modes)
Micro USB Port
Firmware upgradeable (via Micro USB port)
On-board charging (via Micro USB port)
OLED screen
Pico 75 Watt Contents:
1 x iStick Pico 75 Watt mod
1 x Micro USB cable
1 x User manual
This product is for advanced users only - please have great understanding and technical knowledge of how it works in order to properly use it. Use it at your own risk!
In order to use the temperature control feature, you must use nickel, titanium, or stainless steel coils and they must be built with non-resistant wire.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use them as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge of all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there is visible damage on the battery, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment.
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.
Eleaf Pico 75 Watt has been your wishlist!
Add to wishlist
Everything you know and love about Eleaf's batteries is present and correct in this new iteration. Reliablity, good looks, loads of power to spare and pedigree of a company that knows a thing or two about making mods.
With a slightly tweaked operating system, this 80 watt device will power most available tanks quite happily whilst having temperature control and bypass settings for those that like to tinker with things. It's a nice, confortable size (no bigger than the iStick 30) and feels really quite ergonomic thanks to the oval-shaped profile.
Eleaf's iStick series is as popular as ever and here's another excellent new reason to investigate why!
iStick T80 Specifications:
Size: 36 x 28 x 78mm
3000 mAh battery
Output Wattage: 80W Max
Output Voltage: 9V Max
Resistance Range: 0.1ohm-5ohm
Thread: 510
iStick T80 Contents:
1 x iStick T80 Mod
1 x QC 3.0 USB Cable
1 x User Manual
1 reviews
Eleaf iStick T80 has been your wishlist!
Add to wishlist
Say hello to the upgraded version of ELeaf's bestselling iStick Power The iPower 2 comes with an ultra-large battery capacity of 5000mAh in a compact design, which can last you for a remarkably long time at any power setting. The iStick Power 2 allows an intelligent but yet satisfying draw with 80W maximum output and provides you with different vaping experiences with switchable VW / Bypass / Smart / TC (Ni,Ti,SS,TCR) modes. The circuit protection system has both software and hardware protection for over-charging, over-current and over-discharging. It is also supplied with a durable stainless steel spring loaded 510 connector and can be charged through the USB-C (2A fast charging!) port handily located on the side of the device.
Featuring a colour screen and a wonderful new outer shell style and design, the Power 2 is a versatile, rock solid and reliable piece of kit as always from ELeaf. iStick Power Specifications:
Size: 83.2 x 52.5 x 25mm
Output Power: 1W-80W
Temperature Range: 200°F-600°F / 100°C-315°C
Resistance Range: 0.1ohm-3.5ohm (VW mode) / 0.05ohm-1.5ohm (TC Mode)
Output Modes: VW, Bypass, Smart, TC (Ni, Ti, SS), TCR (M1, M2, M3)
5000mAh Internal Battery (charges at 2A via included USB-C cable)
Upgradeable firmware (USB-C)
Dual Circuit Protection
Spring-loaded 510 thread
Reset Function
iStick Power Contents:
1 x iStick Power 2 80W Mod
1 x USB-C cable
1 x User manual
This product is for advanced users only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.
Eleaf iStick Power 2 (5000mAh) has been your wishlist!
Add to wishlist
The iPower comes with an ultra-large battery capacity of 5000mAh in a compact design, which can last you for a remarkably long time at any power setting. The iStick Power allows an intelligent but yet satisfying draw with 80W maximum output and provides you with different vaping experiences with switchable VW / Bypass / Smart / TC (Ni,Ti,SS,TCR) modes. The circuit protection system has both software and hardware protection for over-charging, over-current and over-discharging. It is also supplied with a durable stainless steel spring loaded 510 connector and can be charged through the micro USB port located on the bottom of the device.
iStick Power Specifications:
Size: 83.2 x 52.5 x 25mm
Output Power: 1W-80W
Temperature Range: 200°F-600°F / 100°C-315°C
Resistance Range: 0.1ohm-3.5ohm (VW mode) / 0.05ohm-1.5ohm (TC Mode)
Output Modes: VW, Bypass, Smart, TC (Ni, Ti, SS), TCR (M1, M2, M3)
5000mAh Internal Battery
Upgradeable firmware (USB-C)
Dual Circuit Protection
Spring-loaded 510 thread
Reset Function
iStick Power Contents:
1 x iStick Power 80W Mod
1 x USB-C cable
1 x User manual
This product is for advanced users only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.
Eleaf iStick Power (5000mAh) has been your wishlist!
Add to wishlist
The Eleaf iStick 10W Mini e-cigarette battery is a powerful and compact device that fits comfortably in the palm of your hand.
With its 1050mAh e-cigarette battery, the iStick 10W Mini provides hours of vaping (depending on individual usage) and features variable voltage from 3.3-5.0V to allow vapers to choose their perfect amount of vapour and flavour. Vaping information is displayed on the OLED screen at the top of
the battery making it easy to view the remaining battery charge, voltage set and inhalation duration.
With a USB port the device can be used whilst it is charging and the 5 click on/off button prevents accidental activation.
The iStick 10W Mini e-cigarette battery is a stunning device available in 4 colours.
Please note - this device can only accommodate atomisers down to 1.0ohm resistance and is not suitable for sub ohm vaping.
iStick Mini Specifications:
Output Voltage: 3.3-5.0V
Output Wattage: 10W maximum
Large battery capacity of 1050mAh
Size: 21 x 32.5 x 52mm
Mini USB charging port allowing vaping whilst on charge (1.5 hour charging time)
510 thread connection
Available in Blue, Pink, Black or Silver.
iStick Mini Contents:
1 x iStick Mini 1050mAh battery
1 x Micro USB lead
1 x User manual
Recommended Tanks:
Aspire K2
Innokin iClear 16 Dual Coil
Innokin Prism T20
Hangsen Shadow
Eleaf iStick Mini has been your wishlist!
Add to wishlist
The Eleaf iStick 30 e-cigarette battery is a high quality sub-ohm device that fits in the palm of your hand and delivers outstanding performance.
The 2200mAh e-cigarette battery features variable voltage/wattage from 2.0-8.0V & 5-30W and supports
atomisers with a resistance of 0.4-5ohms. The OLED screen displays the voltage / wattage and the remaining battery charge, the atomiser resistance and inhalation duration. The 5 click power button prevents accidental activation and with a 510 thread connection the iStick 30 is compatible with a wide range of
atomiser tanks.
Constructed of high quality components the iStick 30W is a durable device and is available in four colours - black, silver, blue and silver
iStick 30 Specifications:
Size: 77 x 32.5 x 23mm
2200 mAh battery
Wattage Range: 5W-30W
Voltage Range: 2V-8V
Resistance Range: 0.4ohm-5ohm
Thread: 510
Digital OLED screen displays battery power level, voltage setting (also shown in watts) and inhalation counter.
iStick 30 Contents:
1 x iStick 30 Mod
1 x eGo thread adapter
1 x Micro USB cable
1 x User Manual
Eleaf iStick 30 has been your wishlist!
Add to wishlist
- 1
- Showing 1 - 6 of 6 results