Pioneer4You iPV D5 Mod

from £54.99 59.99

Please note - requires 2 x 18650 batteries (sold separately)

Introducing the latest device from Pioneer4You, the iPV5, which is a 200 Watt device with a Temperature Control feature. Powered by dual 18650 batteries it supports Ti, Ni and Stainless Steel wire. The iPV5 uses the SX330-200 chip set which also supports upgradeable firmware updates.

Continuing in the line of successful box mods, Pioneer4you have refined their box mod to create a brilliant compact device with an excellent form factor. Utilising the Yihi SX330 chip coupled with Pioneer's experience and excellent build quality this is a reliable workhorse mod for everyday use!

Features a SX pure mode for use with the brilliant iPV Pure X2 tank.

Following the famous iPV4 from their iPV line of box mods comes the iPV5. Featuring a max 200 Watts output, the iPV5 provides a ton of power in an ergonomic fashion. The iPV5 will also control temperature with nickel, titanium and stainless steel wires so users can precisely tune their vaping settings. Utilising the SX300-200 chipset that handles with great efficiency and performance. The upgradeable firmware adds versatility to this powerful unit to keep up with the fast paced vaping market. To power the iPV5 200W mod 2 x 18650 batteries are required (batteries sold separately) and are replaced via the strong and sturdy magnetic battery panel located on the side of the unit. Besides the raw power, ergonomic design and the versatile and precise chip, the user also has access to a multitude of protection features to be vaping safe 24/7.

*Please note - The micro USB port on this unit is for FIRMWARE UPDATES ONLY.


iPV D5 Specifications:
  • Output Power: 10W-200W
  • Output Voltage: 1V-7V
  • Input Voltage: 6.4V-9V
  • Output Current: 1A-45A
  • Input Current: 1.3A-45A
  • Output Joule: 10J-100J / 120J for Titanium
  • Resistance Range: 0.15ohm-3.0ohm (VW mode) / 0.05ohm-1.5ohm (TC modes)
  • Temperature Range: 212F-572F / 100C-300C
  • Powered by YiHi SX330-200
  • Magnetic battery panel
  • Spring-loaded 510 pin
  • OLED Screen
  • Micro USB port (for upgrading firmware only)
  • Protection Features:
    • Low voltage protection
    • Low resistance protection
    • High input voltage protection
    • Output short circuit protection
    • Reverse battery protection
    • Temperature overheat protection
  • Temperature Control compatible: Nickel, Titanium & Stainless Steel
  • Upgradeable firmware
  • TCR Value: 0.00050-0.00700

iPV D5 Contents:

1 x iPV5 200 mod by Pioneer4You
1 x Micro USB cable
1 x User manual
1 x Warranty card


This product is for advanced users only - please have great understanding and technical knowledge of how it works in order to properly use it. Use it at your own risk!

In order to use the temperature control feature, you must use nickel, titanium, or stainless steel coils and they must be built with non-resistant wire.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. VaperVapour.com and any of VaperVapour.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

VaperVapour.com and any or all of VaperVapour.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use them as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge of all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there is visible damage on the battery, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment.

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance of local laws and mandates.

Pioneer4You iPV D5 Mod

Related Products

Reviews

There aren't yet any reviews for this product.

Add a review

Recently Viewed Products